Mercedes-Benz

Individual Gears for VDO Instrument Clusters only. (Electronic Speedometer) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 21 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Learn More

Odometer gears for Mercedes with mechanical VDO Speedometers / Odometers. ( cable driven) Tooth count option between 10 and 25 teeth. Please count teeth on the original gear before you order a new one. We also recommend to inspect the lead gear, make sure it is tight on the shaft. Learn More

There are 3 different sizes for the odometer lead gear. The best way to check the gear is to make sure it is tight on the shaft, it should not spin. All you need to do is measure the overall thickness before you order a new gear. The 3 sizes are: 1. ~3.2mm 2. ~4.8mm 3. ~6.4mm Learn More

This gear is located inside the transfer case actuator motor. We use a high temp nylon carbon fiber reinforced material which is self lubricating and better suited for the application than the original material. {Applicable Worldwide} Warranty subject to proof that all four tires replaced at once. See warranty section of website for further information. OE # for assembly: A164 540 01 88GR, A164.540.01.88GR, 164 540 01 88GR, 164 540 01 88 GR, A1645400188GR, 1645400188GR, 1645400188 GR Learn More

This gear is located inside the transfer case actuator motor. We use a high temp nylon carbon fiber reinforced material which is self lubricating and better suited for the application than the original material. {Applicable Worldwide} Warranty subject to proof that all four tires replaced at once. See warranty section of website for further information. OE # for assembly: A164 540 01 88GR, A164.540.01.88GR, 164 540 01 88GR, 164 540 01 88 GR, A1645400188GR, 1645400188GR, 1645400188 GR Learn More

Three Odometer Gear Set for VDO Instrument Clusters only. (electronic signal pick up) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 19 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Learn More